2017 Mazda MX-5 Rf OBD2 Code B1932 Air Bag Driver Circuit Open

B1932 code definition

A B1932 trouble code indicates that the driver side's airbag circuit has been detected as being incomplete, or "open".

What the B1932 code means

In the case of a B1932 code, the airbag electronic controller unit (ECU) has verified that the driver side's airbag circuit is broken. If the circuit is detected as being possibly open, the ECU will run a test to confirm this. A malfunctioning airbag circuit will limit or disable use of the airbag deployment system.

What causes the B1932 code?

Faulty, broken, disconnected and/or corroded wiring is the most common cause for a B1932 trouble code. Components in the airbag deployment system may be faulty as well. If the circuit is fine and the components check out, the B1932 report may be the rest of a faulty CU. However, this is a rare occurrence and should only be considered once the issue has been absolutely confirmed as untrue.

What are the symptoms of the B1932 code?

In the event of a B1932 trouble code, the driver's side airbag will not deploy during a crash. In addition, an illuminated engine lamp and stored B1932 trouble code will be present. These symptoms are purely diagnostic in nature, and will make it easier to pinpoint the cause of the problem.

How does a mechanic diagnose the B1932 code?

The B1932 should be first verified by scanning your 2017 Mazda MX-5 rf with an OBD-II code reader. All wiring throughout the driver's airbag circuit should be inspected, checking for signs of problems. This may include indications of damage, disconnection, corrosion or faulty wiring. A voltmeter or Autohex can be helpful in pinpointing the issue more easily. Any components related to the code should be checked out as well for potential signs of faultiness.

Common mistakes when diagnosing the B1932 code

Body-related trouble codes may stand for a number of different issues depending on the type of 2017 Mazda MX-5 rf. Repairs for one B1932 code interpretation may be confused with another.

How serious is the B1932 code?

Although your 2017 Mazda MX-5 rf can be driven normally with a B1932 code, the lack of a working airbag should be considered a safety hazard. If you choose to operate your 2017 Mazda MX-5 rf without a functioning airbag, take extra care to ensure other safety features (such as the seltbelt) are properly adjusted. It is not recommended to operate a 2017 Mazda MX-5 rf without all of the safety features functioning properly.

What repairs can fix the B1932 code?

Any compromised wiring should be repaired or replaced according to the circumstance and severity of the issue. Repair or replace any faulty or damaged components as is necessary. Following any repairs made to address the B1932 code, give your 2017 Mazda MX-5 rf a test drive. This will allow the code a chance to recur should the issue remain unresolved. If the code is restored, it is an indication that the repairs are incomplete.

Additional comments for consideration regarding the B1932 code

Refer to your 2017 Mazda MX-5 rf's user manual for directions on how to access the airbag circuit.

Need help with a B1932 code?