Vehicles with a 6speed automatic transmission may develop one or more of the following faults related to a broken 35R clutch wave plate inside the transmission: Illumination of the Check Engine Light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723, loss of reverse gear, slipping or harsh 3rd or 5th gear shift. Removal and dis-assembly of the transmission will be required to replace the broken 35R wave plate. It is also extremely important that all debris from the failed part be cleaned from the transmission while it is disassembled in order to try and prevent future problems.
Vehicles with certain V6 engines may illuminate the Check Engine Light one or more of the following codes: P0011, P0014, P0021, P0024, P0341, P0346, P0336, or P0391. Our technicians tell us that some vehicles may require a powertrain control module (PCM) software update to correct this issue. Other vehicles may have excess camshaft end play on one or both cylinder heads which will need to be corrected using special procedures outlined by GM.
A loose or worn gas cap may cause check engine light to illuminate.
Brake fluid can become dirty and may cause problems in the brake system ; it should be flushed every 60,000 miles.
You may be able to prevent transmission problems by servicing the transmission and inspecting the fluid every 30,000 miles. If the fluid is dark or burned then the transmission system should be completely flushed .
Extended life coolant may become contaminated and require cooling system service before the recommended 100,000 miles.
related to exterior-light, turn-signal, not-working
related to interior, instrument-cluster, not-working
related to safety, seat-belt
related to suspension
related to warning-lights, check-engine-light
related to body, sunroof, leak
related to body, sunroof, leak