Defective or worn out ignition coils can cause engine misfires and Check Engine Light illumination. If the problem is severe enough engine performance will suffer and the Check Engine light will flash on and off.
If the engine cranks but won't start, the fault may be internal to the distributor . Diagnosis will show no spark and trouble codes for the crankshaft position sensor (CKP) or the camshaft position sensor (CMP). Our technicians recommend replacement of the complete distributor assembly if these conditions occur.
A loud ticking noise (hydraulic valve lifter noise) may be heard from the top of the engine, particularly when the engine is still cold. The noise may occur more frequently on higher mileage vehicles; Hydraulic valve lash adjusters may need to be replaced to correct this issue. Following the maintenance schedule for oil changes will also help prevent a recurrence of the noise.
If a rumbling noise is heard from the engine, along with a possible loss in power, it may be caused by a collapsed hydraulic timing belt tensioner creating excessive cam backlash. Our technicians recommend replacing the timing belt and water pump at the same time, if they have not been recently replaced.
related to ignition, distributor, replace-remove
related to warning-lights, check-engine-light
related to fuel-system, fuel-filter
related to security
related to trouble-codes, p-codes-powertrain, p1300-p1399, p1345
related to warning-lights, battery-light