1. Home
  4. 2010
  5. Common Problems, Issues, Recalls, and Reliability

Common Problems, Issues, Recalls, and Reliability

  • Engine Overheating Due to Failed Cooling Fan Control Module

    The engine may overheat due to erratic engine cooling fan operation as a result of a faulty cooling fan control module. Replacement of the fan control module would be necessary to correct this condition. Our technicians tell us the Mazda may provide assistance with the cost of this repair.

  • Shifting Concerns for the Six Speed Automatic Transmission

    A well-documented and well-known issue with the Mazda 6 built between 2005-2012 is harsh shifting from the 6-speed automatic transmission , and slight slippage between gears. This has been noted as hesitation to accelerate, especially from a stop.

    Mainly, software issues have been to blame for these mishaps, but mechanical malfunctions related to shift solenoids and the valve body have also been major causes. Finally, the automatic transmissions in these models are sold as ‘sealed for life’, yet the transmission fluid does not seem to last the complete service life of the vehicle.

    Correction of these issues often requires a simple software update, meaning the vehicle only needs to be plugged in, and the transmission controller receives new programming meant to fix these drivability concerns. In cases where this does not correct concerns, the transmission must be removed, inspected, and repaired, possibly requiring a complete rebuild.

    To mitigate these issues from escalating to a full transmission rebuild, many technicians recommend replacing the transmission fluid at regular intervals, yet the manufacturer has never offered this guidance.

  • Ticking Noise From Valve Lash Adjusters Due to Infrequent Oil Changes

    A loud ticking noise (hydraulic valve lifter noise) may be heard from the top of the engine, particularly when the engine is still cold. The noise may occur more frequently on higher mileage vehicles; Hydraulic valve lash adjusters may need to be replaced to correct this issue. Following the maintenance schedule for oil changes will also help prevent a recurrence of the noise.

  • Emissions recall due to problem with swirl shutter valve

    Mazda issued an emissions recall due to a problem with the Swirl Shutter Valve; this would cause the Check Engine light to illuminate.

2010 Questions and Answers

Related Questions

  • Mazda 6 Dear Technician: I Apologize In Advance For The...

    2010 MAZDA 6, 36, 875 MILES

    related to tires, alignment

    Dear Technician: I apologize in advance for the lengthiness of this email. My only intention is to try to describe the events as they occured, so this helps you in diagnosing the problem best...

  • Mazda 6 2010 Mazda 6 Suspension/Steering Issue Diagnosis

    2010 MAZDA 6, 39, 000 MILES

    related to steering, tie-rod-end, nut

    Dear Technician: I would really appreciate if you could help me with what's now become a very frustrating issue! I drive a 2010 Mazda 6, iSport, 4-Cyl, 2.5-L, 39,000 miles, which, as..

  • Mazda 6 Mazda 6 Ticking Noise And Clear Liquid

    2010 MAZDA 6

    related to general, noises, tick

    ***PLEASE HELP ME!*** Yesterday, I was at the CVS Pharmacy Drive-Thru and accidentally partially went over a median with the front right end of my 2010 mazda 6 (the median was separating another..

  • Mazda 6 Car Repair Taking More Time Is It Okay To Leave Car...

    2010 MAZDA 6, 45, 000 MILES

    related to safety, airbag

    Hi, I received a letter for airbag recall. When I dropped my car for service they said it would one hour to fix the airbag. Later they called me and said the parts are not available and it w..

  • Mazda 6 Battery Light Turning On And Off

    2010 MAZDA 6, 2.5L, 4 CYL, 2WD, AUTOMATIC, 72, 000 MILES

    related to warning-lights, battery-light

    Had the alternator checked said it was good, but still having charging problems and the belt is tight and okay. @media(max-width: 960px) { .adt { display: none;padding:0; } } Saturday..

  • Mazda 6 Hazard And Blinkers Do Not Work

    2010 MAZDA 6, 2.5L, 4 CYL, 2WD, AUTOMATIC, 110, 000 MILES

    related to exterior-light, turn-signal, not-working

    Hi Group! I read in many forums that the possible cause could be the BCM. After checking the fuses and light bulbs I went ahead and bought a used BCM. I installed it but the problem persi..

  • Mazda 6 Immobilizer Reset/bypass

    2010 MAZDA 6, 2.2L, 4 CYL, 2WD, MANUAL, 110, 000 MILES

    related to security, bypass

    Is it possible to reset/bypass immobilizer key-less ignition? @media(max-width: 960px) { .adt { display: none;padding:0; } } Sunday, June 28th, 2020 AT 12:55 PM ..

  • Mazda 6 Steering Wheel Controls Do Not Work

    2010 MAZDA 6, 4 CYL, 2WD, AUTOMATIC, 110, 000 MILES

    related to steering, steering-wheel

    Suddenly volume control and up or down track control do not work. Is there a fuse for the steering wheel button controls? @media(max-width: 960px) { .adt { display: none;padding:0; } } ..

  • Mazda 6 Turn Signals And Hazards Not Working

    2010 MAZDA 6, 3.7L, V6, 2WD, AUTOMATIC, 115, 000 MILES

    related to exterior-light, turn-signal, not-working

    Turn signals and hazards are suddenly not working. Fuses are fine. Where is the relay located? @media(max-width: 960px) { .adt { display: none;padding:0; } } Thursday, November 14th, 2..

2010 Maintenance and Repair