2000 Chrysler Concorde Replace Lift Plates Separately From Window Regulator

The window glass lift plates tend to bend or break and cause the window glass to tilt and bind in the door. The lift plates can be replaced separately from the window regulator . In more severe cases, however, a new window regulator may also require replacement.

Affected Model Years

This issue affects Chrysler Concorde model years 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, .

39 people reported this problem

  • 2000 45,000 Miles
    I took door panel off and welded the cheesy flat steel. Haven't' had a problem since...Anyone have problems with the interior door handles not working? Pass. and driver side will not open from inside, I have to roll the window down to open either door from the outside.

  • 2000 120,000 Miles
    i bought a 2002 chrysler concorde in 2009 for $ 1900 and the driver side window started having a tough time going up and down, then it started slightly tilting, then eventual it just stop working, i took it to the shop and they said that the window motor had burned out and they had to repair the window track that misaligned.

  • 2000 0 Miles
    This seems to be a pretty standard problem with these cars. The lift plates are designed so that the stresses of use are focused right on the fold of the steel, which any metallurgist can tell you is the weakest part. Boo!

  • 2000 165,000 Miles
    Looks like the black clip that holds the actual window broke off from the regulator.

  • 2000 18,000 Miles
    Problems with the windows rolling up & down.

  • 2000 0 Miles
    The window gets out of the track and has to be guided into place by hand while the window goes up.Replaced passenger side a few years ago, now drivers side. Was unable to get just the lift plates, had to replace entire glass/plates.

  • 2000 77,000 Miles
    window binds up when trying to raise it, all ive done is remove door panel to truoble shoot

  • 2000 77,000 Miles
    window binds up i have to pull window to the rear of the door to raise the window

  • 2000 101,300 Miles
    Passenger side power window stuck in open position. Not fixed

  • 2000 140,000 Miles
    lift plate was broken off. trying to find out how to fix

  • 2000 170,000 Miles
    window bar has bent and dropped window into door cavity does not roll up or down

  • 2000 0 Miles
    It started with the window getting stuck, off and on... and let to a loud clunk and now the window roles up off the track and has to be guided into place by hand while the window goes up. ~ I love Chrystler (lol)

  • 2000 120,000 Miles
    had to replace lift plates.. -drivers side- but the window wants to close past the stop point.. this stresses the lift plate. so I have to be careful when closing the window

  • 2000 134,000 Miles
    window came from lift plate and cant roll it down