2019 Ford Ranger OBD2 Code B1930 Air Bag Safing Sensor Output Circuit Short To Ground

B1930 code definition

The B1930 trouble code indicates that a shorted circuit has been detected in relation to the airbag deployment system's safing sensor.

What the B1930 code means

The B1930 trouble code is intended as a failsafe to keep the crash sensor from deploying the airbag without due cause. A shorted circuit for the safing sensor occurs when the circuit is flooded with too much energy. The resulting damage will disable the safing sensor and trigger a stored code in your 2019 Ford Ranger 's onboard computer.

What causes the B1930 code?

Faulty or damaged electrical wiring is the most common cause of a B1930 trouble code. The safing sensor charging system may be overworking itself. A faulty safing sensor is another possible cause of a B1930 code.

What are the symptoms of the B1930 code?

A malfunctioning safing sensor will disable activation of the airbag. However, if short circuit problems are affecting your 2019 Ford Ranger 's airbag system as well, the lack of a safing sensor failsafe may result in a deployed airbag. A stored trouble code and illuminated engine lamp will also accompany a B1930 trouble code as diagnostic indicators.

How does a mechanic diagnose the B1930 code?

A B1930 code may be first verified by testing your 2019 Ford Ranger with an ODB-II code reader. All wiring relating to the safing sensor and airbag deployment system should be checked out for potential signs of damage, including (but not limited to) corrosion, disconnection, misplacement and faultiness. If the wiring checks out properly, the safing sensor itself should be looked over for potential signs it may be malfunctioning.

Common mistakes when diagnosing the B1930 code

Body-related trouble codes can refer to different things depending on the model of 2019 Ford Ranger . It is important to verify that this particular code description pertains to your 2019 Ford Ranger . Refer to your 2019 Ford Ranger manual if you are unsure.

How serious is the B1930 code?

A B1930 trouble code will typically disable the airbag deployment system, as a working safing sensor is necessary to activate it. Although this will not affect your 2019 Ford Ranger 's drivability, it may host a safety concern in the event of a crash. Should you choose to drive a 2019 Ford Ranger with a disabled airbag deployment system, make sure to use other safety features, such as a seatbelt.

What repairs can fix the B1930 code?

Replace any fried electrical wiring and mend any poor connections in the circuit as needed . If the safing sensor or other components related to the circuit have been damaged, they should be repaired or replaced accordingly. If the charging system overpowered the circuit as a result of a fault, it should be replaced. After all repairs have been completed, retest your 2019 Ford Ranger to see if the trouble code recurs. This will indicate whether or not the repairs have proved successful.

Additional comments for consideration regarding the B1930 code

In most cases, the safing sensor can be found behind the kick panel on the passenger's side of your 2019 Ford Ranger . The safing sensor is located on the passenger's side in order to make it more susceptible to the force of a crash impact.

Need help with a B1930 code?