2012 Chevrolet Colorado 4wd-crew-cab OBD2 Code P0175 P0175 System Too Rich (Bank 2)

P0175 code definition

P0175 System Too Rich (Bank 2)

What the P0175 code means

P0175 indicates that the Engine Control Module (ECM) detects too much fuel and not enough oxygen in the air fuel ratio (AFR). This code will set when the ECM can not compensate for the amount of air or fuel required to return the air fuel ratio back to the set parameters.

For gasoline powered engines, the most fuel efficient and cost efficient air fuel ratio is 14.7:1, or 14.7 parts air and 1 part fuel. This ratio also creates the maximum amount of power during the combustion process.

The combustion process is very simple yet fragile. In most 2012 Chevrolet Colorado 4wd-crew-cabs, there are four to eight combustion chambers within the engine. Air, gasoline, and spark are all delivered to the combustion chambers to create an “explosion” (better known as combustion). The spark is delivered to each combustion chamber a nanosecond after the air and fuel reaches the chamber to ignite it. There is a piston in each combustion chamber; each piston is forced down by the combustion at a rapid rate, and at different times.

The difference in the timing of each piston is determined by the air fuel ratio and the timing of the engine. Once the piston is down, it must return to the up position in time for its next combustion process. The piston is forced back up little by little each time one of the other cylinders undergoes its own combustion process because they are all connected to a rotating assembly known as the crankshaft. It's almost like a juggling effect; at any given time, one piston is on its way up, while another one is at its peak, and another piston is on its way down.

If something in this process goes out of sequence, internal engine components will work harder and work against each other, or the engine may even not run at all. In the case of code P0175, there will likely be higher gas consumption, as the ECM has detected that there is too much fuel being used.

What causes the P0175 code?

• A clogged, stuck, or leaking fuel injector
• Faulty fuel regulator
• Dirty or faulty mass air flow sensor
• Faulty coolant temperature sensor
• Faulty thermostat
• ECM needs reprogramming
• Dirty or faulty oxygen sensor
• Vacuum leak
• Fuel delivery problem
• Incorrect fuel pressure

What are the symptoms of the P0175 code?

• Increased fuel consumption
• Soot or black residue from exhaust
• Check Engine Light illumination
• Strong exhaust odors

How does a mechanic diagnose the P0175 code?

• Checks the fuel pressure

• Inspects the fuel injectors for restrictions

• Checks fuel injector pulse

• Examines the fuel lines for pinches or cracks

• Inspects all vacuum lines for cracks and deterioration

• Inspects the oxygen sensors

• Uses a scan tool to read the engine temperature, then compares the findings to an infrared thermometer

Common mistakes when diagnosing the P0175 code?

• Not checking the temperature of the engine with a scan tool and comparing it to a thermometer

• Deeming a component bad without verifying through testing

How serious is the P0175 code?

• A system that is running too rich will force the catalytic convertor to filter out more pollutants, which will shorten the lifespan of the catalytic convertor

• The resulting increased gas consumption could be very expensive

• Improper air fuel ratio causes the engine to work harder, which will shorten the lifespan of the engine

• The engine will create increased levels of harmful pollutants

What repairs can fix the P0175 code?

• Replacing cracked or broken vacuum lines
• Cleaning or replacing oxygen sensors
• Cleaning or replacing mass air flow sensor
• Reprogramming of the ECM
• Replacing the fuel pump
• Replacing the fuel filter
• Replacing a damaged or pinched fuel line
• Replacing a faulty fuel injector
• Replacing a stuck thermostat
• Replacing a faulty coolant temperature sensor

Additional comments for consideration regarding the P0175 code

I strongly suggest verifying that the cooling system of your 2012 Chevrolet Colorado 4wd-crew-cab is working correctly. If your 2012 Chevrolet Colorado 4wd-crew-cab is running abnormally cool, the engine will always run in a rich condition. This is because the ECM is designed to run at a rich rate when cold to help warm the engine up faster. If the coolant temperature sensor is faulty or the thermostat is stuck open, your 2012 Chevrolet Colorado 4wd-crew-cab may never reach a warm temperature, which will cause it to always run in a rich condition.

Need help with a P0175 code?

Check Engine Light

trouble codes

P0175