The anti-theft system may cause a no start condition due to electrostatic discharge (ESD) affecting the wireless control module (WCM). There is an updated WCM to correct this issue.
The automatic transmission can develop problems like erratic shifting, rough shifting, or delayed gear engagement. Repairs for many of these problems are outlined in service bulletins.
A knocking sound my be heard from the engine at times with the air conditioning on. The cause could be the AC compressor itself, if that is the case there is an updated AC compressor to correct this issue.
Sensor failure inside the distributor can cause intermittent stalling or a failure to start. In addition, the wires to the distributor are susceptible to internal damage, which can cause the same symptoms.
There have been reports of premature head gasket failure; an updated gasket design is available to correct this problem.
Spark plug tube seals fail, causing the tubes to fill with engine oil and the engine to misfire. As a result, the engine may run poorly and fuel economy can suffer.
A defective vehicle speed sensor can cause problems with the cruise control and speedometer operation , as well as erratic shifting. The connectors on the sensors are also susceptible to corrosion, which will create similar symptoms. Any of these problems can cause check engine light illumination.
Some vehicles may develop a musty odor coming from the HVAC system, Dodge has issued a cleaner/disinfectant and a coating for the evaporator designed to inhibit bacterial growth.
2.0L 4 Cylinder Due to misalignment of the power steering pulley, the power steering belt may be noisy or show irregular wear. Using shims or possibly a new power steering pump bracket in order to correct the alignment issue should fix the problem.
An engine Oil leak may develop at the cam sensor o-ring seal. Our technicians tell us this is often misdiagnosed as an external head gasket leak.
Failure to use the correct automatic transmission fluid and follow the maintenance schedule can result in shifting problems.
Corrosion on the door ajar switch can cause the door ajar warning light and dome light to work intermittently or not at all. A new switch (and possibly a new connector) will be needed to fix the issue.
External body trim may become loose and prevent the doors from opening properly.
related to interior, instrument-cluster, gauges, engine-temperature
related to fuel-system, fuel-pump, fuel-pressure
related to ignition, spark-plug
related to interior, instrument-cluster, lights
related to engine-cooling, water-pump
related to exhaust, white-smoke-
related to interior, gas-pedal
related to security, disarm
related to suspension, strut, symptoms, loud
related to exterior-light, turn-signal
related to warning-lights, low-fuel-light
related to body, door, handle, replace-remove
related to general, flood-damage
related to warning-lights, check-engine-light
related to ignition, distributor, replace-remove
related to ignition, distributor, replace-remove
related to fuel-system, fuel-pump
related to ignition, spark-plug, replace-remove
related to security
related to general, noises, squeal
related to exterior-light, turn-signal
related to interior, water
related to fuel-system, fuel-pressure-regulator, location