2008 Saturn Vue OBD2 Code P0210 Injector Circuit Malfunction - Cylinder 10

P0210 code definition

Injector Circuit Malfunction - Cylinder 10

What the P0210 code means

• P0210 will be seen when the Engine Control Module (ECM) has found a malfunction within the cylinder 10 fuel injector circuit. The ECM constantly looks for the proper voltage and resistance in the injector circuit and when the performance is out of range.

• This code is similar to P0200-P0209, P0211, P0212, which all indicate fuel injector circuit issues.

What causes the P0210 code?

• Wiring harness that has an open or short
• Failing or failed cylinder 10 fuel injector
• ECM that is faulty
• Electrical connection that is poor

What are the symptoms of the P0210 code?

• The Check Engine Light is observed on the dashboard after the fault is detected by the ECM

• A failsafe mode, which is a precaution to prevent damage to your 2008 Saturn Vue , is enacted by the ECM

• Failsafe mode remains in effect until the circuit has performance that is within range or the fault is repaired

• Excessive fuel consumption

• Misfires, lean conditions, rich conditions

• Engine that dies or struggles to stay running

• Vehicle may be hard to start or not restart at all

How does a mechanic diagnose the P0210 code?

• Uses a scan tool to check for any codes stored in the ECM, and notes freeze frame data

• Clears the codes and performs a test drive

• If the code comes back, performs a visual inspection to check for any damaged wiring, broken components, or other failures

• Uses the scan tool to monitor fuel injector data

• Uses a multimeter to check for voltage at the cylinder 10 fuel injector

If no components have tested bad at this point:

• Installs a noid light and checks the voltage pulse

• Tests the ECM to manufacturer's specifications

Common mistakes when diagnosing the P0210 code

Common mistakes can be made if the procedures and steps are not followed properly. This can lead to good parts being replaced when they have not been tested properly, and a waste of time and money.

How serious is the P0210 code?

The P0210 can be fairly serious depending on the symptoms. In any case, it should be inspected and repaired as soon as possible to ensure safe driving. In cases where your 2008 Saturn Vue has trouble running or dies, it should not be driven further as it is now unsafe.

What repairs can fix the P0210 code?

• Replacing fuel injector cylinder 10
• Replacing or repairing wiring harness
• Replacing ECM
• Poor electrical connection repaired

Additional comments for consideration regarding the P0210 code

• Some speciality tools will be needed to accurately diagnose P0210. The first is a professional grade scan tool that allows the user to view live data, injector voltage, and changes over time in the injector circuit. This is very handy when intermittent issues are present.

• As 2008 Saturn Vue s age, it is not uncommon for varnish to build up in the fuel system. This is caused by contamination particles found in gas. These can clog fuel injectors and filters, causing issues. A cleaner like Seafoam can sometimes help P0210 before the injector is replaced.

• A noid light set is a useful tool for testing fuel injectors that have proper voltage but are still not operating properly. These are installed in place of the fuel injector and light up when the proper voltage pulse that controls the injector spray duration is achieved.

Need help with a P0210 code?

Check Engine Light

P0210

trouble codes