The purpose of the tpms on your 2018 dodge durango is to warn you that one or more tires is under-inflated which could produce premature tire wear, tire failure, and unsafe driving conditions. to perform a reset of the tpms only takes a few moments. first, turn the ignition to the "on" position without starting the vehicle. now, press the "reset" button (which is found to the right of the steering wheel) until you see the tire pressure light blink three times and then release the button. start the vehicle and wait for at least 10 minutes for the sensors to refresh. you have completed the procedure and the tpms has successfully been reset.
To reset the tpms on the 2018 dodge durango make sure the tire pressure is correct, then turn on the vehicle. now hit the reset button that is to the right of the steering wheel and wait ten minutes. in some cases you may need to hold the button down till the light flashes. if the sensor is not working correctly then you may have tires with incorrect pressure, and the car can get bad performance.