2008 Saturn Vue OBD2 Code P001A A Camshaft Profile Control Circuit/Open

P001A code definition

The P001A code indicates that camshaft and crankshaft signals have malfunctioned and are out of sync. The powertrain control module, or PCM, notes the timing issue and sets the code.

What the P001A code means

P001A is the OBD-II generic code that appears when the PCM detects a noticeable lack of synchronization between the movement of the camshaft and the crankshaft. Because the engine needs gas inside the cylinder, which is what A camshaft valves manage, any issues with the valves are a serious problem. The engine uses intake valves to bring fuel into its cylinders. There are also exhaust valves, but all of the valves are run on the camshaft and if there is a code that indicates that the circuitry responsible for operating the camshaft, it will mean that a host of performance issues can occur.

What causes the P001A code?

There are several issues that can lead to the PCM noting the P001A code:

• Bad sensor in the camshaft or crankshaft
• A damaged or loosened timing chain
• A faulty timing belt or timing chain
• Corroded or damaged sensor wiring
• Defective camshaft sensor
• Defective crankshaft sensor

What are the symptoms of the P001A code?

P001A code will typically have symptoms such as a poorly running engine, a no-start condition, reduced power in the engine, an engine that runs rough, and the appearance of the check engine light.

How does a mechanic diagnose the P001A code?

The P001A code is diagnosed by the technician using the OBD-II scanner. They ensure the code is present and look for any other codes that could be a sign of another issue. They use the freeze frame data too, and then clear the codes before retesting to see if the P001A appears. They will perform a visual inspection of any connections or wiring to ensure there are no open, shorts, corrosion or disconnections. They will make repairs as needed. They then use a scanner and digital ohm meter to test their camshaft's sensor and circuitry as well as that of the crankshaft and related components. The timing chain or belt may be tested as well.

Common mistakes when diagnosing the P001A code

It is not unusual for the technician to believe that it is a camshaft sensor that is the problem, without also considering issues such as the timing belt. This can also trigger the code and is something that needs to be considered during diagnostics and repair.

How serious is the P001A code?

A P001A code can prevent your 2008 Saturn Vue from operating safely or at all. It can reduce power and make it difficult maneuver unexpectedly. It can have a negative impact on the engine's performance, and is not something that should be ignored or left alone for a long period.

What repairs can fix the P001A code?

There are a few ways that the P001A code is addressed:

• They can replace the sensor
• They may find it necessary to replace the timing belt's tensioner
• The mechanic may have to replace or repair electrical components and wires for the sensor
• They may have to replace the crankshaft sensor or wiring

Additional comments for consideration regarding the P001A code

Because wiring is such a common cause behind this code, it is important that full diagnostics occur. The camshaft profile control circuit issue can have serious effects on the performance of the engine, and yet it can be very difficult to diagnose without the use of proper tools.

Need help with a code?

Check Engine Light

trouble codes

P001A