2007 Ford Freestar OBD2 Code B1948 Climate Control Water Temperature Sensor Circuit Short To Ground

B1948 code definition

The B1948 code is a manufacturer-specific body code related to the climate control system. In this case, the engine control module (ECM) has detected a fault or a short to ground in the circuit for the climate control water temperature sensor.

What the B1948 code means

A code B1948 will be stored when the ECM detects a coolant temperature signal circuit fault between the instrument pack and the air conditioning / climate control module (A/CCM). The A/CCM receives an engine coolant temperature voltage signal from the instrument pack.

The A/CCM monitors the engine coolant temperature circuit for open circuit, high resistance and short circuit conditions. If a fault is present, a DTC will be flagged. If a circuit fault occurs between the coolant temperature sensor and the instrument pack, the instrument pack output will default to a voltage equal to 68-degrees Fahrenheit. If a circuit fault occurs between the instrument pack and the A/CCM, the A/CCM will substitute a default value of 169-degrees Fahrenheit.

What causes the B1948 code?

Several problems may cause a B1948 code including:

• Damaged or defective wiring and related electrical components
• Signal circuit between instrument pack and A/CCM short circuit to ground
• Harness/wiring problems between heater valve and climate control module
• Fault or failure at one (or more) of the air mixing/blending flaps
• Fault in the pressurized A/C system , including condenser fan, compressor, refrigerant pressures/leaks
• Damaged or defective heater fan
• Damaged or defective climate control module

What are the symptoms of the B1948 code?

Symptoms of a B1948 code may include: * Check engine or warning light may illuminate * The air condition/climate control system may not function correctly (for example, blowing warm air only)

How does a mechanic diagnose the B1948 code?

A mechanic may use several methods to diagnose a B1948 trouble code, including: * Utilize an OBD-II scanner to check for a stored B1948 trouble code * Visually inspect wiring and related electrical components for damage or defects * Visually inspect for any leaks in the A/CCM system * Check operation of pressured air conditioning system * Check the fuse for the heater valve to see if blown or damaged * Check the connection to the heater valve for damage or loose connectors or corrosion on the valve itself * Check the evaporator discharge temperature sensor(s) for damage or defect * Test the voltage, current, and resistance on the heater valve

How serious is the B1948 code?

Because a 2007 Ford Freestar 's safe driving operation will not be impacted due to faults that store a B1948 code, this code is not considered a serious code. When this code appears, it is recommended to take your 2007 Ford Freestar to your local service center or mechanic for repair and diagnosis as soon as possible.

What repairs can fix the B1948 code?

Several repairs can fix a B1948 trouble code and include:

• Repair or replace any damaged, corroded, open, or shorted wiring and related electrical components
• Repair any possible leaks in the A/CCM system
• Replace damaged, defective, or blown fuses
• Replace damaged or defective heater valve
• Replace damaged or defective evaporator discharge sensor
• Clear all codes, test-drive your 2007 Ford Freestar , and rescan to see if any codes reappear

Need help with a B1948 code?