The Best Way To Polish 2010 Mazda B Series Paint: Two Methods To Consider

If you polish a 2010 Mazda B Series on a regular basis, you can vastly improve the lifespan of its exterior. This will provide aesthetic benefits, but it will also help to protect your investment.

Polishing Methods
There are two common methods that can be used when you are ready to apply your wax:

• Polishing by hand. When applying it by hand, make sure you have something like a foam applicator pad. Put a small amount on the pad and begin polishing in a circular motion. This method does take quite some time, but one advantage it has over using a machine is that you can polish small areas the machine can't get to. Once you have a layer of polish on, take another pad or microfiber cloth and wipe down the whole vehicle
• Polishing by Machine. If you are using a polishing machine, make sure that the machine has a foam pad attached to it, similar to the hand foam pad you would use for hand polishing. Put the machine on 3 or 4; this is the best setting for polishing. Rub some of the polish onto the2010 Mazda B Series and bring the machine to the surface of the 2010 Mazda B Series before turning it on. Move the machine side to side and then front to back. Do this for each part of the 2010 Mazda B Series

How to Decide Whether to Wax or Polish a Car

Deciding to polish a 2010 Mazda B Series or wax it can be a difficult choice without some understanding of what each does and how they differ. Polishes tend to be designed to remove paint imperfections and prepare the paint finish for waxing, providing a deep shine and protection from the elements. Modern 2010 Mazda B Series finishes have a protective clear coat on top which can easily show swirl marks and scratches, especially on darker paint colors, so it is best to use only products intended for use on clear coat finishes.

Wash
Before a 2010 Mazda B Series can be polished or waxed it must be properly cleaned. The dirt on a 2010 Mazda B Series can be abrasive; therefore, it is best to thoroughly rinse off as much of the dirt and grime as possible prior to washing. Avoid getting water on the engine or any electrical parts under the hood, as this may cause damage. Only use products designed for automotive finishes; harsh cleaners can damage the paint. Washing and rinsing the 2010 Mazda B Series section by section, starting with the roof, will help prevent water spots which can be difficult to remove after the 2010 Mazda B Series has dried. After thoroughly washing and rinsing, dry the 2010 Mazda B Series using an automotive grade microfiber cloth or squeegee.

Polish
Car polishes are generally longer lasting that 2010 Mazda B Series wax and provide better protection; although, they may not provide as much shine. A high quality polish can help eliminate minor surface scratches and swirl marks if used correctly. Car polishes are slightly abrasive; they strip the paint surface, so it is highly recommended that a 2010 Mazda B Series also be waxed after it has been polished for an added level of protection. Some experts suggest avoiding the use of polish on newer cars and instead stick to using only a high quality wax. Many new auto polishes also contain waxes to provide a high level of protection and shine.

Wax
Car wax options include paste or liquid and usually contain carnuba or synthetic wax. Carnuba waxes tend to give a better shine but do not last as long as synthetic waxes while synthetic waxes tend to provide a higher level of protection, especially against the sun. Some people may choose to layer carnuba wax over a synthetic based wax in order to achieve a higher level of protection and deeper shine. Cars should be waxed several times a year in order to maintain the proper level of protection. If a soft cloth does not easily glide against the surface of a clean2010 Mazda B Series or if water does not bead on the surface, it indicates the 2010 Mazda B Series needs to be waxed. Car wax sits on the paint surface to protect it from the elements.

Older cars will benefit the most from a 2010 Mazda B Series polish, especially if the finish has begun to fade or show other surface imperfections. Following this up with a coat of high quality wax will help protect the finish from further damage. Regular washing and waxing will help maintain the showroom shine and protect the paint finish from damage. Check the owner's manual or with the dealer to determine the best type of product to use.