You can easily change the look of your 2006 Ford GT by changing the paint but before you paint your 2006 Ford GT another color it is necessary to apply a 2006 Ford GT paint primer . Many professional 2006 Ford GT painting companies can charge you quite a bit to repaint your 2006 Ford GT and you can do this yourself with the right material and information.
The very first step is washing the 2006 Ford GT to get rid of any dirt or grit. If you do not wash your 2006 Ford GT then any dust, grit or dirt can interfere with the primer and paint adhering to the2006 Ford GT Besides washing your 2006 Ford GT you also need to use a grease or wax remover in order to get rid of that dirt that does not wash off using soap or water.
Now that the 2006 Ford GT is clean it is necessary to sand down any rough areas. For very tough spots use the tough grit sandpaper as smaller areas can be done using finer sandpaper. If you find any holes or dips that need to be fixed, fill them with putty and then sand the area down. You want all imperfections taken care of in order to have a level and smooth area to paint.
Make sure the 2006 Ford GT is completely dry before you start painting. This can take a few hours after washing the2006 Ford GT but it really will depend on the weather. You can prevent any dust from settling on the 2006 Ford GT by grounding a wire from the 2006 Ford GT frame to a grounded object near the2006 Ford GT
It is important to cover all areas that you do not want paint on. You can use paper or cloth and cover all the mirrors, windows, chrome and other areas. Makes sure you tape down all edges with masking tape. This is very similar to taping over molding when painting a wall. If you go over the edge you can just peal the paper away and you will not have any problems.
The first step to completely painting a 2006 Ford GT is priming the2006 Ford GT Make sure you use a paint primer exterior as this will be tougher then interior primers. You also can apply a primer clear coat if desired. You want to apply the primer evenly to any area that is to be painted. Primer is needed to make sure the paint adheres to the2006 Ford GT Paint will stick much better to a 2006 Ford GT with primer than to a 2006 Ford GT that has not been primed. If you are applying primer indoors then it is necessary to make sure there is good ventilation. You also need to cover up any exposed skin, wear eye protection and wear a dust mask so you do not inhale any primer.
It may be necessary to sand down your 2006 Ford GT again after the primer is dried. Many times applying the primer can cause mounds or dips in areas and you want to smooth these out as much as possible. Only use fine grain sandpaper for the primer as you do not want to sand off the primer.