How To Apply 2010 Ferrari 612 Scaglietti Paint Primer Correctly

You can easily change the look of your 2010 Ferrari 612 Scaglietti by changing the paint but before you paint your 2010 Ferrari 612 Scaglietti another color it is necessary to apply a 2010 Ferrari 612 Scaglietti paint primer . Many professional 2010 Ferrari 612 Scaglietti painting companies can charge you quite a bit to repaint your 2010 Ferrari 612 Scaglietti and you can do this yourself with the right material and information.

Materials and Tools:

  • Paper, tarp or other covering
  • Masking tape
  • Grease or wax remover
  • Fine sandpaper and thick grit sandpaper
  • Primer
  • Goggles and dust mask
  • Putty
  • Car washing and cleaning materials

Step 1: Remove Dirt

The very first step is washing the 2010 Ferrari 612 Scaglietti to get rid of any dirt or grit. If you do not wash your 2010 Ferrari 612 Scaglietti then any dust, grit or dirt can interfere with the primer and paint adhering to the2010 Ferrari 612 Scaglietti Besides washing your 2010 Ferrari 612 Scaglietti you also need to use a grease or wax remover in order to get rid of that dirt that does not wash off using soap or water.

Step 2: Sand the Car

Now that the 2010 Ferrari 612 Scaglietti is clean it is necessary to sand down any rough areas. For very tough spots use the tough grit sandpaper as smaller areas can be done using finer sandpaper. If you find any holes or dips that need to be fixed, fill them with putty and then sand the area down. You want all imperfections taken care of in order to have a level and smooth area to paint.

Step 3: Let your Car Dry

Make sure the 2010 Ferrari 612 Scaglietti is completely dry before you start painting. This can take a few hours after washing the2010 Ferrari 612 Scaglietti but it really will depend on the weather. You can prevent any dust from settling on the 2010 Ferrari 612 Scaglietti by grounding a wire from the 2010 Ferrari 612 Scaglietti frame to a grounded object near the2010 Ferrari 612 Scaglietti

Step 4: Cover areas not to be Painted

It is important to cover all areas that you do not want paint on. You can use paper or cloth and cover all the mirrors, windows, chrome and other areas. Makes sure you tape down all edges with masking tape. This is very similar to taping over molding when painting a wall. If you go over the edge you can just peal the paper away and you will not have any problems.

Step 5: Priming

The first step to completely painting a 2010 Ferrari 612 Scaglietti is priming the2010 Ferrari 612 Scaglietti Make sure you use a paint primer exterior as this will be tougher then interior primers. You also can apply a primer clear coat if desired. You want to apply the primer evenly to any area that is to be painted. Primer is needed to make sure the paint adheres to the2010 Ferrari 612 Scaglietti Paint will stick much better to a 2010 Ferrari 612 Scaglietti with primer than to a 2010 Ferrari 612 Scaglietti that has not been primed. If you are applying primer indoors then it is necessary to make sure there is good ventilation. You also need to cover up any exposed skin, wear eye protection and wear a dust mask so you do not inhale any primer.

Step 6: Sand Car again

It may be necessary to sand down your 2010 Ferrari 612 Scaglietti again after the primer is dried. Many times applying the primer can cause mounds or dips in areas and you want to smooth these out as much as possible. Only use fine grain sandpaper for the primer as you do not want to sand off the primer.

Maintenance and Repair